How to add a Z-Wave device You can only add a maximum of six Z-Wave devices to the product at any given time. If the maximum number is reached, you need to remove a Z-Wave device before you can add a new one. See How to remove a Z-Wave device on page 39. 1. Go to Setup > Wireless I/O. 2. Select Enable Z-Wave and click Save. You may need to wait for a few minutes for Z-Wave to become active. 3. Click Add. The product starts looking for Z-Wave devices in the Z-Wave network. 4. Set the Z-Wave device to be added into learning (inclusion/exclusion) mode as described in its User Manual. 5. If requested, enter the PIN delivered with the Z-Wave device, and click Enter. 6. Wait until the adding process is finalized as indicated by Status: Done on the web page. The device's status information window opens. 7. Click Refresh to update the Z-Wave device info, e.g. battery status, and add a name for the device. Click Save

Frequently asked questions

Is the M5065 compatible with Home Assistant?

Yes — the M5065 is supported by Z-Wave JS, the modern Z-Wave stack used by Home Assistant. Pair it through the Z-Wave JS UI or the Home Assistant Z-Wave integration. A Z-Wave controller is required.

What protocol does the M5065 use?

The M5065 communicates over Z-Wave.

Data: zwave

← Back to results